Керамическая волоконная лабораторная маленькая электрическая печь с программным управлением и высокотемпературной топкой для серебряной глины и эмали.

Керамическая волоконная лабораторная маленькая электрическая печь с программным управлением и высокотемпературной топкой для серебряной глины эмали.

Unavailable in Russian Federation

Welcome to the Universal Grobal Universal Tools Factory Store

1. Product technical parameters

1.1 Temperature range: 100 ~ 1000℃;

1.2 Fluctuation degree: ±1℃;

1.3 Display accuracy: 1℃;

1.4 Furnace size: 165×120×105 MM

1.5 Dimensions: 350×260×430 MM

1.6 Heating speed: ≤100℃/min; (the speed can be adjusted below 100 degrees per minute)

1.7 Power of the whole machine: 1.5KW;

1.8 Power source: 220V, 50Hz;

2. Temperature control system

2.1 Temperature measurement: K-indexed nickel-chromium-nickel-silicon thermocouple;

2.2 Control system: LTDE fully automatic programmable instrument, PID adjustment, display accuracy 1℃

2.3 Complete sets of electrical appliances: use brand contactors, cooling fans, and solid state relays;

2.4 Time system: heating time can be set, constant temperature time control, automatic shutdown when constant temperature time is reached;

2.5 Over-temperature protection: built-in secondary over-temperature protection device, double insurance;

2.6 Operation mode: The whole range can be adjusted at a constant temperature, and it runs constantly; the program runs.

3. Furnace structure and materials

3.1 Furnace shell material: The outer box shell is made of high-quality cold plate, treated with phosphoric acid film salt, and sprayed at high temperature, and the color is computer gray;

3.2 Furnace material: It is made of six-sided high-radiation, low-heat storage and ultra-light fiber stove board, which is resistant to rapid cold and heat, and is energy-saving and efficient;

3.3 Insulation method: air heat dissipation;

3.4 Temperature measurement port: the thermocouple enters from the upper back of the furnace body;

3.5 Wiring post: The heating wire terminal is located at the lower back of the furnace body;

3.6 Controller: located under the furnace body, built-in control system, compensation wire connected to the furnace body

3.7 Heating element: high temperature resistance wire;

3.8 Weight of the whole machine: about 10KG

3.9 Standard packaging: wooden box