ACF conductive glue removal liquid RW-66 ITO cleaning TAB module repair solvent acf | Обустройство дома

ACF conductive glue removal liquid RW-66 ITO cleaning TAB module repair solvent acf | Обустройство дома

Product Name: ACF Removal Liquid Place of Origin: Japan Use: ACF glue that has been heated and hardened for cleaning ACF can have a good expansion and separation effect. Especially for HITACHI.SONY ACF has a good removal effect. 100% imported model: RW-66 Features: strong removal ability, good effect, no volatility, easy to store, no pungent odor, harmless to human body. ACF removal fluid (RW-66) SOLIGIN RW-66 is produced by EVER GROW international CO., LTD. It is a special solvent for cleaning the surface of ITO Glass and TCP for poor processing of ACF (Anisotropic Conductive Film). This solvent is specially used to remove anisotropic conductive adhesives such as thermoplastic, semi-thermosetting and thermosetting. Note: This solvent is easy to volatilize, please do not use it in the basement or poorly ventilated places. 、When using this agent, you need to open the doors and windows to let the air circulate completely. , Keep away from heat, sparks and fire sources. , When using this product, do not smoke, and turn off the gas stove, heater, oven, electric heater, etc., until the gas is dissipated before use. Instructions for use: Use a thin bamboo stick to coat this product on the surface of the ACF colloid to be removed, and let it stand for about 5-6 minutes (the required standing reaction time varies depending on the ACF brand), and after the ACF colloid is softened (if If it is still not softened, please let it stand for a few more minutes. If the solvent has dried out before softening, please apply it again), and then scrape it off with a thin bamboo sheet. Note: Do not use this solvent for products made of PU or rubber. 1. Avoid breathing the gas for a long time, and don't let the product touch the throat, eyes, skin or clothes. Please wash your hands thoroughly after use. 2. Operators should wear organic gas protective masks, goggles, chemical solvent-resistant gloves and long-sleeved overalls to avoid contact with the throat, eyes and skin. 3. When you smell a strong smell or feel dizzy or vomiting during operation, stop using it immediately. It is caused by poor ventilation. Please open the doors and windows and improve the ventilation until the above phenomenon disappears before continuing to use. 4. Be careful when opening this agent, do not bring your mouth, nose or eyes close to the mouth of the bottle. Because there is gas accumulated in the bottle, you must wait for the accumulated gas to dissipate before using it. Close the mouth of the bottle tightly after use. , After wiping the paper, rags and used containers and bottles, put them in an iron bucket after proper disposal. Packing method: plastic bottle 25ML/piece, storage method: this product should be stored at room temperature. Validity period: 12 months at room temperature (25).