Устройство для защиты от всплесков напряжения 2P DC 600V 1000V 20KA-40KA | Обустройство дома

Устройство для защиты от всплесков напряжения 2P DC 600V 1000V 20KA-40KA | Обустройство дома

Surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the dc networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the dc power supply line (solar panel side and inverter/converter side), especially
if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

1.Type 2 surge protective device for Photovoltaic.

2.Module design, convenient installation, could be replaced.

3.Time of response <25ns.

4.The color of visible window shows operating status, green means normal, red means abnormal.

5.No leakage, no operating currents.

6.Remote Signaling (option).

Product Model

YTTS1-PV

Pole

2P

3P

Rated Frequency

One port

SPD Category

Combined type

Test Category

Class II test

Colour

Green

White

Green

White

Maximum Continuous Operating Voltage Uc

600VDC

600VDC

1000VDC

1000VDC

1500VDC

Voltage Protection Level Up(8/20μs)

≤2.2kV

≤3.2kV

Nominal Discharge Current ln(8/20μs)

20kA

20kA

Maximum Discharge Current lmax(8/20μs)

40kA

40kA

Response Time tA

≤25ns

Size

36x90x66

54x90x66

Failure Indication

Green: Normal Red: Failure

Sectional Area Of Wires

6~25mm2

Installation Method

35mm standard rail

Working Environment Temperature

-40℃ ~+85℃

Sheathing Material

Plastic

Protection Level

IP20

Executive Standard

IEC 61643-31