1 piece (SHT Precolored blanks 98x10/12/14mm )/Dental zirconia for full contour /vita 16 shade | Красота и здоровье

1 piece (SHT Precolored blanks 98x10/12/14mm )/Dental zirconia for full contour /vita 16 shade | Красота и здоровье

SHT  preshaded  ( Super high translucent preshaded ) it makes full contour crown & bridge , it translucent rate 44%

For the color we can offer the  vita 16 shaded. When you do the order, you can leave us the message ,which color 

You will choose it, then we will ship out your goods according your message.

a.raw material is high ,we use the finest zirconia powder

b.Isostatic pressed, ensures all parts have a homogenous density and shrinkage distribution. 

c. More accurate scaling factor  for each disc. 100% compatible with wieland or open CAD/CAM milling machine

d.Reliable, controllable, strictest  production process to make sure the same quality per batch and stable quality . 

e. The  HT Precoloured blanks  zirconium with increased translucency and high bending strength (about 1100 Mpa) for copings and fully anatomical restorations for up to 14 units. Isostatically pressed with a lifetime warranty

The dental zirconia blocks is for the creation of crowns, bridges, inlays and veneers of fixed partial denture.
Milling dental zirconia block with your CAD/CAM machine and then send the framework into furnace for sintering. Our HT Zirconia the final sintering temperature is 1480 degree Celsius.  About our ST zirconia the final sintering temperture is 1530 to 1550 CControl the rate of temperature climbe within 8 degree per minute and make sure the framework is fully cooled down to room temperature before removing it.

Our SHT color is the same like our ST blanks sintering temperate form.

Components

HT

ST

UT

pre-shaded ST

ZrO2+HfO2+Y2O3

≥99%

≥99%

≥99%

≥98%

Y2O3

4.5%-6.0%

4.5%-6.0%

9%-10%

＜0.5%

Al2O3

＜0.25%

＜0.15%

＜0.05

＜0.5%

Other Oxides

＜0.15

＜0.15

≤0.05

＜0.5%