v mouth strip scissors T-45 degree 90 angle notch pliers EPDM broken aluminum window glue | Инструменты

v mouth strip scissors T-45 degree 90 angle notch pliers EPDM broken aluminum window glue | Инструменты

Description:
1.v mouth strip scissors color random delivery
2. Head material: high carbon steel
3. Blade size: 18mmx28mm

Blade installation:

1. Select the left and right blades first, and fix the blade to the tool holder with the fixing screws corresponding to the position of the tool holder, but do not tighten it so that the blade can be adjusted freely.

2. Use a small hex wrench to adjust the wire on the knife holder so that the blade and the base are tightly combined with the tip of the two blades, and then tighten the blade fixing screws. Please note that when adjusting the blade, always hold the knife holder handle by hand, so that the knife holder can clamp the blade, so that the adjusted blade will not move. You can also adjust the side of the blade to tighten and then adjust the other side.

3. When adjusting, the tool holder should be placed in a light environment to see if there is any gap between the blade and the base.

4, when the blade is not sharp, the blade can be removed and can be reused by grinding with fine stone.

use:

There is a horizontal reference line on the base of the knife holder. When placing the strip on the base, the edge line of the strip should be parallel to the horizontal reference line of the base, and then a slight 89 degree notch can be cut out with a little force.