2018 12Lines 3D Laser Level 360 Horizontal And Vertical Cross Self-Leveling Red Beam Line+Receiver/Detector | Инструменты

  The button introduction:   "ON" button: open laser, directly to use  Top slope mode button: Long press boot, into slope mode, tilting the laser,laser will flash slowly   Leveling function:   Once the pendulum is in unlocked condition, the instrument will be self-leveling within 4° when the unit is using out of the leveling range, laser lines and main indicator will keep flashing.   Slope mode:   With the pendulum lock switch in the OFF position, press and hold the operation key until the laser beam appears, and then you can select the laser beam mode. In this mode, the inclination angle of the instrument exceeds 4degree, the laser beam will flash slowly   Pulse mode:    In the "ON" state, the laser line lights up, long press the top button 2-3s, enter the pulse mode, you can use the receiver to detect the laser line   How to use the detector with a laser level?   1: First, turn on 93T/190 laser level’s pulse mode,"ON" button,open laser,press the top button 3-5s to enter pulse mode 2: Second, turn on the detector and search the laser lines.  When the detector detects the laser lines, it will make “Beep” sounds. can turn off the sound