Up to 20 KHz 650A Oscilloscope Multimeter AC DC Current Clamp 20mA Measuring Instruments | Инструменты

Up to 20 KHz 650A Oscilloscope Multimeter AC DC Current Clamp 20mA Measuring Instruments | Инструменты

Up to 20 KHz 650A Oscilloscope Multimeter AC DC Current Clamp 20mA to 650A DC Measuring Instruments Oscilloscope

Please note:Battery and color are  not included !

Item Description

AC/DC frequency range: Up to 20 kHz
Effective Measurement Range: 20mA to 650A DC
It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you\'re able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data.

Application:

 Power circuit measurement and malfunction analysis; 
·Motor drive of frequency converter (or other electronics) measurement; 
·Power electronics equipments measurement.

General Characteristics

Conductor size can be measured: the maximum diameter of 30mm

Low battery indicator: red led light flashes

Operating temperature range: 0 to50 , 70% R.H.

Storage temperature range: -20 ~ + 70 , 80% R.H.

Weight: 290gm (typical)

Dimensions: 178 mm (H) x 70 mm (W) x 33 mm (D)

Electrical Characteristics (23 ± 5 , 70% R.H. maximum)

Accuracy:

DC Current:

0 to 650A, ± (3% of reading + 2A)

AC current (50Hz to 400Hz):

0 to 500A, ± (3% of reading + 2A)

500A to 600A, ± (6% of reading + 2A)

600A to 650A, ± (8% of reading + 2A)

Load Impedance: 10KΩ (typ)

Output ratio:

0 to 650mV (AC / DC) corresponds to 0 to 650A (1mV / 1A gear);

0 to 1.6V (AC / DC) corresponds to 0 to 160A (1mV / 100mA range);

Package List:

1*AC/DC Current Clamp

1*Instruction Manual