48 led Solar Light PIR Motion Sensor Powered Garden Lights IP44 Waterproof Lawn Lamp Landscape Spot Lamps | Освещение

48 led Solar Light PIR Motion Sensor Powered Garden Lights IP44 Waterproof Lawn Lamp Landscape Spot Lamps | Освещение

SKU: Ki03-48-03n

New 800 LM 48 LED Solar Power Street Light PIR Motion Sensor Lamps wall Lamp with adjustable bracket ip65 for outdoor street garden yard pathway door etc without remote controller

important: the package exclude remote controller, but the lamp can use remote controller to control, you can buy 1 pcs remote controller to controll all lamps.

Advantage and update for this model

update point:

1. update the pole to safety lock rotate bracket, can rotate 180 degree in 2 position.

2. update the lumens from 500 to 800 lumens, add the lighting area, and update 36 leds to 48 leds, light up more erea and more bright

3. add remote control function, the package not inclue remote controller

white lamp shell cool white lighting color without remote controller

Black lamp shell cool white lighting color without remote controller

Lamp specifications:
Lamp power usage: 5.5 V 2.5 W
Battery: 3.7 V 2000 mAH Lithium
Expected battery charge time: 8 hours
LED quantity and type: 48 x 2835 SMD
Rated power: 3.8 W
Lumens: 800 total
Colors: 6000 k to 6500 K
Rotate bracket: rotate 180 degree in 2 position, tighten by nuts and self lock
Solar panel power: 5.5 V 2.5 W
Solar panel conversion rate: 17 % efficiency
Solar panel life expectancy: 15 years
Waterproofing: IP65 ,can endure extreme whether but can not imerse to water

Details of lamp operations:
Direct sunlight hits the solar panel and charges the onboard battery during the day.
The lamp senses low light and automatically come to work mode, if in dim mode, keep dim light at night and fully light after people motion, if in motion mode, will light up when people come at night, if in steady light mode, will keep light at night and come to motion mode after 3 hours automatically.
The LEDs activate when the lamp senses motion within range.
After motion activation, the LEDs will remain illuminated for 15 seconds before shutting off. Continuous or repeated movement within range will extend illumination time.
The lamp senses daylight and automatically come to charging mode
If manual power control is required, press the function switch for 3 seconds to either activate or deactivate lamp power.
for remote control, press the on button for 3 seconds to switch on the light, and press function button to set up mode and adjust brightness.
rotate bracket have Gear lock function, when adjust the bracket, pls release the nuts, otherwise, can not adjust the degrees.

· Questions You May Concern

Q:Does the light need to be activated?

A: Yes,press the switch on/off button on lamp or remote controller for 5 seconds to switch on the lamp.

Note it will not turn on if it's sunny or still light in your house.

Test in a dark room to the setting you want.

Motion activates it by the white ball in the front.