Green Leaf Climbing Tiger Wallpaper Self-adhesive PVC Waterproofing Thickening Wall Pastoral Style Brick Refitting | Обустройство

Green Leaf Climbing Tiger Wallpaper Self-adhesive PVC Waterproofing Thickening Wall Pastoral Style Brick Refitting | Обустройство

[Self-adhesive] The back of the color film is gummed, which can be torn open and pasted just like the instant paste, without any additional glue brushing.

【规格】宽度61cm，长度按米标价，需要多少米就拍多少件，比如拍10件就是10米一卷发货。

[Specification] The width is 61cm and the length is priced according to the meter, so you can take as many pieces as you need, for example, 10 pieces are shipped in a roll of 10m.

【厚度】厚度是0.16mm，不含底纸。

[Thickness] Thickness is 0.16 mm, without base paper.

【味道】PVC墙纸本身材质是没有味道的，但背面带胶水，会有点胶水的气味属于正常情况，我们使用的是环保的胶水，粘好全屋通风两三天左右就没有了。

[Taste] PVC wallpaper itself is odorless, but with glue on the back, the smell of glue is normal. We use environmentally friendly glue, and if we stick it well, the whole room will be ventilated for about two or three days.

【色差】不同批次生产会有色差，建议一次购买足量，避免色差影响美观。

[Chromatic aberration] Different batches of production will have chromatic aberration. Suggestions are made to buy enough at one time to avoid the influence of chromatic aberration on beauty.

使用方法：

Usage method:

1） 先选好贴纸粘贴的位置，然后把要粘贴的表面墙、玻璃、家具等上面的尘土或油渍擦干净（表面需光滑平整，不掉灰，不受潮，无灰尘）。

1) Choose the position of sticker first, then wipe the dust or grease stains on the surface wall, glass, furniture and so on (the surface should be smooth and smooth, not dust, not damp, no dust).

2） 测量需要贴纸的位置和规格，裁剪适合的纸张规格，预留一定的损耗

2) Measure the location and specifications of stickers, cut the appropriate paper specifications, and reserve certain losses.

3） 开始贴的时候，建议各位朋友顺着墙面从上往下贴，边贴边撕底纸同时还要用干毛巾向两边擦走气泡，方法简便、易掌握,而且贴得很平整，没有气泡，是喜欢DIY的淘友的好选择!

3) At the beginning of pasting, I suggest that you stick it up and down along the wall, tear the bottom paper and wipe the air bubbles with a dry towel on both sides. The method is simple and easy to master, and the paste is very smooth, without air bubbles. It's a good choice for friends who like DIY!

4） 如果贴以后感觉位置不满的话，请慢慢撕下来换位置再贴,如果贴完有汽泡就用针扎一下跑掉空气就可以了

4) If you feel dissatisfied with the position after pasting, please tear it down slowly and change the position to paste it again. If there are bubbles after pasting, you can run off the air with a needle.