Pneumatic Conveyor Vacuum System Air Hopper Suction Machine for Material Conveyer | Инструменты

Pneumatic Conveyor Vacuum System Air Hopper Suction Machine for Material Conveyer | Инструменты

1. Please dry clean air source

2. Please keep the material dry and do not transport wet or sticky materials.

3. Please keep the air circulating when transporting the material. Do not use the product in the sealed environment

4. Negative pressure is not allowed when conveying materials to prevent them from blowing back

5. In order to achieve the best effect of material transportation, please keep the air source adequate and the compressed air pressure should reach 0.55-0.65mpa

6.  try not to use 90 degree elbow connection to prevent the performance of the conveyor

Brief introduction:

Pneumatic conveyors are also known as pneumatic conveyors, pneumatic conveyors, pneumatic conveyors, material conveyors, particle conveyors, on-line conveyors, pipeline conveyors and so on

Working principle:

When compressed air enters the annular high-pressure chamber of the pneumatic conveyor through the inlet pipe, it will speed-out air stream at high speed through the internal physical structure. This high-speed air stream will generate a low pressure at the entrance and form a vacuum. Therefore, the material at the entrance will be inhaled by the high-pressure air stream, move with the compressed air, and be input to the designated position.

Application example:

7. Smoke extraction in mechanical processing and smoke removal in welding

Features:

5. The surface of all aluminum alloy products in our store has been oxidized, which has the characteristics of wear-resisting, corrosion resistance and long service life.

\

'