120X3 Oring 120mm ID X 3mm CS CR Chloroprene FKM FPM Fluorocarbon NBR Nitrile O ring O-ring Sealing Rubber |

120X3 Oring 120mm ID X 3mm CS CR Chloroprene FKM FPM Fluorocarbon NBR Nitrile O ring O-ring Sealing Rubber |

120X3 Oring 120mm ID X 3mm CS CR Chloroprene FKM FPM Fluorocarbon NBR NitrileO ring O-ring Sealing Rubber - Free Shipping

Hardness and color of the product will be sent randomly. If you need the specified color or hardness, please leave a message or send me a message. If your specified hardness or color is not in stock, I will tell you. Thank you for your order.

Description

For CR Chloroprene: The service temperature of Chloroprene can be designed from -40°C to 100°C or up to 125°C depending on different grades. Generally higher than 100°C, life time will be shortened. Chloroprene was one of the first successful synthetic elastomers in 1931 by Dupont. It is prepared by emulsion polymerization of chloroprene, or 2-chlorobutadiene. CR is a multi-purpose elastomer which yields a balanced combination of properties. It has good resistant to sun, ozone, weather and perform well in contact with oils and many chemicals. It also display outstanding physiacal toughness and good resistant to fire.

For FKM FPM Fluorocarbon: The general type the service temperature is better limited to approximately from -26°C(-15°F) to 232°C(450°F) in static application. Because FKM has excellent resistance of high temperature, oil, solvent, flame, chemical and weather, it is usually applied in automotive, chemical processing, aerospace and many industrial.

For NBR Nitrile: The service temperature can be designed from -55°C to 100°C or up to 125°C depending on different acrylonitrile content and formula. Generally higher than 100°C, life time will be shortened. NBR compounds have excellent resistance to abrasion, non-polar oils and solvent, water and permeation (higher acrylonitrile content will be better). NBR also can be used in conditions of dilute acids, alkalis and salt solution at low temperatures.

Terms of Sale

More Injector Orings and Injector Filters Available from us (If you need whole repair Kits, please tell the seller the fuel injector OEM, thanks):

The photos are just for illustration purposes only.
No sales tax is required.

Return Policy

Returns for exchange are permitted and must be initiated by the buyer within 7 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact me via email for an authorized.Buyers are responsible for the returning shipping costs under any circumstances.

Contact Us

If you have any question, please send message to us, we will reply in 24 hours.
Please leave a positive feedback if you are satisfied with the product.
If you are not happy with a product for any reason, please firstly contact us before leaving a neutral or negative feedback, we will do our best to resolve the problem for you and make you satisfied.
Computer display or other reasons, if the color and look a little different in kind, please buyers understand that we try to do the best
Enjoy your trip again, thank you!