27X3 Oring 27mm ID X 3mm CS EPDM Ethylene Propylene NBR Nitrile VMQ Silicone PU Polyurethane O ring O-ring Sealing Rubber | Автомобили и

27X3 Oring 27mm ID X 3mm CS EPDM Ethylene Propylene NBR Nitrile VMQ Silicone PU Polyurethane O ring O-ring Sealing Rubber | Автомобили и

27X3 Oring 27mm ID X 3mm CS EPDM Ethylene Propylene NBR Nitrile VMQ Silicone PU PolyurethaneO ring O-ring Sealing Rubber - Free Shipping

Hardness and color of the product will be sent randomly. If you need the specified color or hardness, please leave a message or send me a message. If your specified hardness or color is not in stock, I will tell you. Thank you for your order.

Description

For EPDM Ethylene Propylene: The service temperature can be designed from -55°C to 125°C or up to 150°C (for peroxide cured systems). In phosphate-ester based hydraulic fluids and glycol based brake fluids systems Ethylene Propylene Rubber is good choice for sealing parts. Appling in domestic water, rubber parts must pass the chloramine and chlorine resistance test. It is not suitable for any types Ethylene Propylene Rubber, higher saturated EPDM or EPM and higher ethylene content will be well for chloramine and chlorine attacking. It also usually be used in hot water or steam up to 150°C. Ethylene Propylene Rubber is not suitable in petroleum fluid (fuels, mineral oils, greases)

For NBR Nitrile: The service temperature can be designed from -55°C to 100°C or up to 125°C depending on different acrylonitrile content and formula. Generally higher than 100°C, life time will be shortened. NBR compounds have excellent resistance to abrasion, non-polar oils and solvent, water and permeation (higher acrylonitrile content will be better). NBR also can be used in conditions of dilute acids, alkalis and salt solution at low temperatures.

For VMQ Silicone: The service temperature are from -60°C to 225°C. Some special types can be used in extreme temperature up to 300°C and down to -100°C. Silicone rubber performs well under environmental and temperature extremes, it usually be applied in automotive and aerospace industries, where flexibility and longevity are important. It also has outstanding electrical insulating properties, applying in strict performance standards are critical. And it is a suitable material for parts that need FDA approval for food handling equipment and appliances.

For PU Polyurethane: The service temperature of PU is -40°C to 80°C, shortened lifetime up to 100°C. Polyurthane usually are applied in mechanical industry, especially in the place requires material must have higher wear resistance and higher strength. Some applying environment will happen moisture condensing on the surface of rubber seal, which will cause hydrolysis of AU, so choosing EU is better. But EU doesn't resist well to oil, the lubricant must use higher aniline point oil.

Terms of Sale

More Injector Orings and Injector Filters Available from us (If you need whole repair Kits, please tell the seller the fuel injector OEM, thanks):

The photos are just for illustration purposes only.
No sales tax is required.

Return Policy

Returns for exchange are permitted and must be initiated by the buyer within 7 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact me via email for an authorized.Buyers are responsible for the returning shipping costs under any circumstances.

Contact Us

If you have any question, please send message to us, we will reply in 24 hours.
Please leave a positive feedback if you are satisfied with the product.
If you are not happy with a product for any reason, please firstly contact us before leaving a neutral or negative feedback, we will do our best to resolve the problem for you and make you satisfied.
Computer display or other reasons, if the color and look a little different in kind, please buyers understand that we try to do the best
Enjoy your trip again, thank you!